Industrial Chillers & Process Cooling Products
Industrial chillers and process cooling equipment, built in our own plant and sized to your plant's real load profile.
Carnot is an industrial chiller manufacturer: every unit in this range is engineered and built at our plant in Çayırova, Kocaeli, and selected against your process load rather than a catalogue size. Choosing a range starts with how heat leaves your site. Water-cooled chillers suit plants with a cooling tower or water source and large, continuous loads of up to 4,000 kW. Air-cooled chillers install outdoors without a condenser water circuit and cover 2 to 2,000 kW. Where winters are cool and the load runs year-round, dry coolers and free cooling units reject heat without running compressors for much of the year. For injection moulds and other tools that need tight temperature control, temperature control units work alongside the chiller and hold the process at up to 150 °C.
Water-Cooled Chiller Units
Tundra and ZERO series, 10–4,000 kW; scroll, screw and in-development centrifugal compressor options.
Tundra Series Chiller
A high-efficiency 30–4,000 kW water-cooled chiller range with scroll or screw compressor options.
- Capacity
- 30–4,000 kW
- Compressor
- Scroll / screw
Zero Series Chiller
A low-GWP, high-efficiency 10–4,000 kW water-cooled chiller range using R1234ze refrigerant.
- Capacity
- 10–4,000 kW
- Refrigerant
- R1234ze
Air-Cooled Chiller Units
Thule, Chemic and ZERO series, 2–2,000 kW; outdoor installation, inverter fans, laser and low-temperature configurations.
Thule Series Chiller
An industrial air-cooled chiller range from 2 to 2,000 kW with scroll or screw compressors and inverter fans as standard.
- Capacity
- 2–2,000 kW
- Compressor
- Scroll / screw
Chemic Series Chiller
A 40–160 kW air-cooled chiller range using natural R290 refrigerant, microchannel condensers and EC fans.
- Capacity
- 40–160 kW
- Refrigerant
- R290 (propane)
Zero Series Chiller
A high-efficiency 10–1,800 kW air-cooled chiller range with R1234ze, GWP 1.37 and inverter fan technology.
- Capacity
- 10–1,800 kW
- Refrigerant
- R1234ze
Dry Cooler and Free Cooling Units
Fusion free cooling unit 15–2,000 kW, Kalter dry cooler 90–1,800 kW; heat rejection without water consumption and up to 60% energy savings.
Fusion Series
A 15–2,000 kW industrial chiller with mechanical, hybrid and full free-cooling modes for high annual energy savings.
- Capacity
- 15–2,000 kW
- Operating principle
- Free cooling
Kalter Series
A 90–1,800 kW industrial dry-cooler range with inverter fans, closed-circuit operation and low energy consumption.
- Capacity
- 90–1,800 kW
- System
- Dry cooler
Temperature Control Units
Molder series, 5–60 kW, up to 150 °C; precise temperature control for injection moulds.
Let's engineer solutions tailored to your needs
By analyzing your process and operational data against engineering criteria, we determine capacity, system configuration, and implementation details. Let's turn your technical requirements into the right equipment selection and an actionable system design.